About Dedicated Server Power
Let Nuvabill run the dedicated servers you sell from Hardware.
- Redfish (HTTPS) for Dell iDRAC, HPE iLO, Supermicro and most new servers, IPMI for older boards
- Clients get power buttons (power on, shut down, restart, force restart and force off, as each product allows), with a question before each forced action and at most 6 presses in 10 minutes
- Health checks every 15 minutes: temperatures, fans, power supplies and drives. A failed part or a temperature above its critical limit is emailed to your team once, and the fault closes by itself when it is fixed
- Power use in watts every 15 minutes: graphs for 24 hours, 7 days and 30 days, and kWh this month and last month, for your team and for the client
- Power history: who switched what and when, on the machine page and for the client (without staff names)
- Next boot from the local disk, the network (PXE) or the BIOS setup: always for your team, and for clients on the products you choose
- Suspended servers are shut down and forced off after a wait, and checked every hour; ended servers are switched off before the wipe
- Safe by design: BMC logins are stored encrypted and never shown again, BMC certificates are pinned, no login is sent before you trust the certificate, IPMI passwords never appear on a command line, and clients never see the BMC, its address or a staff name
Needs Nuvabill 0.7.0 or newer and a network path from your Nuvabill server to the BMCs (a private management network or a VPN). Without this add-on, Nuvabill still sells your machines and emails your team to switch them by hand.
One license is for one website. Test sites (localhost, .test, dev. and staging. addresses) are free.
- Redfish (HTTPS) for Dell iDRAC, HPE iLO, Supermicro and most new servers, IPMI for older boards
- Clients get power buttons (power on, shut down, restart, force restart and force off, as each product allows), with a question before each forced action and at most 6 presses in 10 minutes
- Health checks every 15 minutes: temperatures, fans, power supplies and drives. A failed part or a temperature above its critical limit is emailed to your team once, and the fault closes by itself when it is fixed
- Power use in watts every 15 minutes: graphs for 24 hours, 7 days and 30 days, and kWh this month and last month, for your team and for the client
- Power history: who switched what and when, on the machine page and for the client (without staff names)
- Next boot from the local disk, the network (PXE) or the BIOS setup: always for your team, and for clients on the products you choose
- Suspended servers are shut down and forced off after a wait, and checked every hour; ended servers are switched off before the wipe
- Safe by design: BMC logins are stored encrypted and never shown again, BMC certificates are pinned, no login is sent before you trust the certificate, IPMI passwords never appear on a command line, and clients never see the BMC, its address or a staff name
Needs Nuvabill 0.7.0 or newer and a network path from your Nuvabill server to the BMCs (a private management network or a VPN). Without this add-on, Nuvabill still sells your machines and emails your team to switch them by hand.
One license is for one website. Test sites (localhost, .test, dev. and staging. addresses) are free.
What it can do on your site
Adds settings for staff
Staff set it up in the admin area.
Staff set it up in the admin area.
Controls your dedicated server hardware
Switches the power, network ports or installs of your own machines under Hardware, and adds to the Hardware pages.
Switches the power, network ports or installs of your own machines under Hardware, and adds to the Hardware pages.
Adds its own database tables
Keeps its own data.
Keeps its own data.
Runs on a schedule
Does its work at set times through your cron job.
Does its work at set times through your cron job.